Includes Internal Bezel Trim (aluminium L section 20mm x 20mm, black powder-coat paint). This bezel can be used as a template to cut out the Crew Cab Rear Window aperture.
Once you have cut the correct shaped aperture, you will need rivets and adhesive sealant (purchase below) to attach the Crew Cab Rear Window.
If you need the Crew Cab Rear Window completely wide open the gas strut brackets can be unscrewed from the frame.
The Crew Cab Rear Window can also be used on the roof of a vehicle as a sun roof, in this case the drain holes must be blocked with silicone sealant.
See: Masai Defender side windows Fitting Instructions
These fitting instructions are NOT actually for this specific rear window but the principles are the same. Be very careful to cut the exact shape aperture needed.